NP720022-NP720023-TQO configuration Bearing-FV BEARING INDUSTRIES

NP720022-NP720023

Dimensions

Bore diameter	d	450 mm
Outside diameter	D	595 mm
Total bearing width over outer rings	T	415 mm
Total bearing width over inner rings	B	415 mm
Abutment diameter shaft	d1	≈ 520.192 mm
Abutment diameter housing	D1	≈ 561 mm
Inner ring radius (chamfer)	r1,2	min. 1.5 mm
Outer ring radius (chamfer)	r3,4	min. 6 mm

Calculation data

Basic dynamic load rating	C	8720 kN
Basic static load rating	Co	- kN
Fatigue load limit	Pu	- kN

Calculation factor
e	0.31
Y1	2.16
Y2	3.22

Weight

Application

Interchange

Mass: 310 Kg

ROLLING MILL

TIMKEN

Four-row tapered roller bearings NP720022-NP720023- (450x595x415mm),Mass:310Kg,Rolling mill bearings manufacturer.Roll neck bearings made by FV perfectly replace the original bearings.

FOUR-ROW TAPERED ROLLER BEARINGS

Engineered for use in rolling mill roll-neck applications with high-radial and axial load capacity. FV's wide range of four-row tapered roller bearings are used extensively on flat product mills in work rolls, intermediate rolls and backup rolls, as well as in long product work rolls.